0.6/1 kV及接下來熱塑聚氯乙烯絕緣層電氣高壓電纜含高級型、隔熱、無鹵型（隔熱、無鹵拖鏈電纜線）、耐火型（耐火拖鏈電纜線） 0.6/1 kV AND BELOW XLPE INSULATED POWER CABLE (Including the common types, flame retardant types, fire-resistant types)

一、貨品共同點及使用 Features and uses

電化學交聯聚氯乙烯絕緣層電能電能，具備著高物理效果、耐氛圍剪切力好、很好的電子商務特性和耐電化學生銹等優點和缺點，車輛設備含水量輕，空間結構十分簡單，選用便宜。本車輛設備選使用在額定的電阻值0.6/1 kV輸配電設備盤整體，供輸配電設備盤能功能。阻燃性型電線通信線纜的主要的優缺點是電線通信線纜不方便暴炸，或暴炸時延燃僅互補性在需要範圍內，使用于于電線通信線纜敷設稠密因素對比高的發發電廠、輕軌、鐵路橋、中高層房建、大興工礦區工廠、石油勘探、礦山等經營場所。耐火型纜線的主耍特性是除過能在普通的的工作的條件下文件傳輸魅力外，纜線在起火然燒時仍能保持著固定時期的普通執行。選在核電站站、地鐵線、隊道、高多層建筑施工等與防火阻燃安全防護和消防員救生管于的地方。

XLPE insulated power cables, which has high mechanical robustness, good environmental stress, excellent electrical properties and chemical resistance characteristics, is simple in structure ,light in weight and convenient in applicable. This product is suitable for rated voltage of 0.6/1 kV power distribution system, for transmission and distribution of electric energy use. The main features of flame retardant cable is not easy to catch fire,or it can confine the fire in some limited area. There fore the cable is applicable to the places where the density of cable laying is high,such as generating stations, subways, tunnels, high-rise buildings, large industrial and mining enterprises, oil field, coal mine and other places. The fire-resistant cable is besides the power transmission under normal condition, can continue operating normally for some time when it catches fire,so it is applicable to the place which is concerned to the fires safety and fire rescue,such as nuclear power plant,subway,tunnel,high-rise building and so on.

二、完成準則 Standards

GB12706或IEC 60502及涉及到的中國內地外基準。如：BS、VDE、JIS、AEIC等。 IEC60502 and GB12706 or the relevant domestic and international standards. Such as: BS, VDE, JIS, AEIC and so on.

三、選擇性狀 Product features

1、纜線導體是最高的不可以事業的溫度：通常執行時90 ℃，虛接等問題時（最主要虛接等問題維持精力5 s）為250 ℃。 Max. admissible temperature for conductor：90 ℃ under normal running condition，250 ℃ during short circuit（max. duration not exceeding 5s）.

2、電攬的敷設保底溫度因素為0℃，敷設時至少屈曲圓的直徑為：單芯電攬20（D+d）±5 %，mm 多芯電線15（D+d）±5 %，mm 式中：D--電線的現實外徑，mm d--電纜電線導體的實際上的外徑，mm Minimum temperature of the cable laying 0 ℃, the minimum bending radius when laid: Single-core cable： 20 (D + d) ± 5%, mm Multi-core cable：15 (D + d) ± 5%, mm Where：D--Cable diameter mm of the actual d--mm diameter cable conductor of the actual

四、軟件尺寸及命名（見表4-1） Types of products（Table 4-1）

表4-1 Table 4-1

五、0.6/1 kV熱塑電線電纜結構特征圖示圖 0.6/1 kV XLPE cable schematic 0.6/1 kV熱塑電力電纜構成還有單芯構成、二芯構成、三芯構成、四芯構成（含3＋1構成）、五芯構成（含4＋1，3＋2構成）等，分開見圖1-13。 0.6/1 kV XLPE cable structure comprises a single core, two core, three core, four core (including 3+1 structure ), five core structure(including 4+1,3+2 ), respectively, as shown in Figure 1-13。

六、服務的組成部分性能 Product structure parameters 0.6/1 kV交連電力電力數據線電線大部分架構參數值其中包括單芯電力電力數據線電線、二芯電力電力數據線電線、三芯電力電力數據線電線、四芯電力電力數據線電線（含3＋1芯電力電力數據線電線）、五芯電力電力數據線電線（含4＋1芯電力電力數據線電線，3＋2芯電力電力數據線電線）等，分別是見表6-1～6-8。 0.6 / 1 kV XLPE cable main structure parameters including single core cable, two core cable, three core cable, four core cable(including 3+1 core cable),five core cable(including 4+1 core cable, 3+2 core cable), respectively, are shown in table 6-1 to 6-8.